SavvyLevel S5 Introduction


Preamble

Be sure to read this guide in its entirety, it contains important information on how to install and operate your SavvyLevel.

This user manual applies to all Savvylevel® S5 RV Leveller models (referred to as Savvy5 in this guide). Throughout this guide we will make a reference to an ‘RV’ that equally applies to Caravan, Campers, Trailers, Motorhomes, 4WDs, Vans and Food Trucks i.e., all Recreational Vehicles.

Introduction

Figure 1                                                                              Figure 2

                   

Savvy5 solution is a fully integrated levelling system designed for caravans, campers, trailers, motorhomes, vans, 4WDs and food trucks.

A small, lightweight device installed in your RV provides real-time (and silky-smooth display motion) levelling information so you can effortlessly level your RV, all from the comfort of your seat.

The Savvy5 solution comprises a precision level detection Bluetooth® device, Figure 1, mounted internally within your RV, that communicates with your Apple or Android smart phone/tablet, Figure 2.

It is easy to install and use. It boasts an amazing accuracy of ±0.1° across its operating temperature range. Once installed, it only requires you to enter dimensions of your specific RV and capture/save your preferred level.

There are 2 Apps available:

-       SavvyCV5 to be used with caravans, campers and trailers.

-       SavvyMH5 to be used with motorhomes, vans, 4WDs & food trucks.

Both Apps display your RV’s Pitch and Roll in both degrees and height in millimeters or inches.

 

SavvyCV5 provides a feature that enables users to record their preferred hitching and unhitching height (height of the A-frame at the release point from tow vehicle).

 

In addition, SavvyMH5 displays a ‘Top View’ window that lets you know each wheel’s adjustment requirement.

 

‘Block Type’ functionality, when enabled, will display the number of blocks to be used when adjusting Roll.


Key Features

  • For use with
    • Apple™ devices, Software Version 13 and above.
    • Android™ devices, Android Version 7.0 and above.
  • Designed to be powered by USB-C or your Caravan battery supply (12V/24V).
  • Extremely simple to operate
  • No WIFI required. Connection is via Bluetooth to your smartphone (internet not required).
  • After the 1 connection is completed, it will auto connect when the device is in range.
  • When connected to your RV battery, it provides real-time voltage reporting of that battery.
  • Each device is 100% factory tested and calibrated.
  • Includes thermal calibration and compensation resulting in superb accuracy of ±0.1° over normal operating temperatures.
  • Engineered to the highest standards using only the finest materials.
  • Supports landscape and portrait orientation for caravan/camper/trailer.
  • Displays ‘Top View’ of 4WD/van/motorhome with accurate level requirement for each wheel.
  • 10x zoom feature to obtain outstanding accuracy and visual clarity for level of angles less than 4.5°.
  • Inclinometer style gauges display ±45° and ±4.5° in 10x zoom mode.
  • Quick display of number of Blocks when roll needs to be corrected (when using blocks).
  • For caravan/camper/trailer, hitching/unhitching height recording indicator that captures the height of the A-frame at the release point from tow vehicle.
  • Sensor fusion preventing un-readable jitter when in 10X zoom and during motion whilst levelling.

Specifications

  • Wireless Bluetooth 5.2 Low Energy connectivity (no internet or cloud services required).
  • BLE transmit power 15dbm and receiver sensitivity -96dbm.
  • Full device BLE backward compatibility using 1M PHY.
  • Advanced gyroscopic sensor fusion with sample phase matching and AI mix selection.
  • Device range typically 80-200m in an open environment.
  • Combined pitch and roll data streaming ultra-low latency of 75mS.
  • Accuracy better than ±0.1° over entire operating environment.
  • Precision better than ±0.02°.
  • Supply voltage: either USB or internal RV’s 12V/24V system.
  • Fully protected against reverse wiring when the internal RV 12V/24V connection is used.
  • Low operating current when app connected < 12 mA @ 12V.
  • Operating temperature extremes -40°C to +85°C.
  • ± 45° pitch and roll in normal operation.
  • ± 4.5° in (10x) zoom mode.
  • Physical dimensions measure 73mm x 58mm x 22mm.