Savvy5 will arrive in a package as shown below:
Figure 6
Please take the following steps when installation of the Savvy5 solution post position testing:
1. You should now have selected a suitable mounting location. If not, refer to then SavvyLevel® Positioning Guide section.
2. The supplied Savvy5 mounting hardware, (see Figure 6) comes pre-assembled and consists of three parts: Savvy5 unit, cradle, and retainer clip. Disassemble by removing the retainer clip and sliding Savvy5 unit out of the cradle (see Figure 7).
Figure 7
3. Mount cradle with rear section oriented as shown above, Figure 7, and with red arrow facing the front of the RV (towards the tow-vehicle, if it is used). Secure using double sided adhesive or small screws (not supplied).
4. Slide the Savvy5 into the cradle, note orientation of the red arrow.
5. Insert the retainer clip to secure Savvy5 in the cradle.
6. Connect Savvy5 to power using your chosen method: USB or hardwired option.